| PART | DESCRIPTION | NOTES |
| C ------ | | CAPACITORS |
| C1-3 | .01uF 600V (optional) | cer/mylar unl. noted |
| C4, C6 | 47 uF 250V electr. | |
| C5 | 47 uF 350V electr. | |
| C7 | 100 uF 450V electr. | |
| C8, 9 | 10 uF 450V electr. | |
| C10-14 | 2200 uF 16V electr. | |
| C101,201 | 0.1 uF 50V | |
| C102,202 | 2.2 uF 50V elect. | |
| C103,203 | 10 uF 450V elect. | |
| C104,204 | 47 uF 50V electr. | |
| C105,205 | 10 uF 50V electr. | |
| C106,206 | 20uF 250V electr. | |
| C107,207 | 1 uF 450V electr. | |
| C108,208 | 100-1000 pF (as needed) | |
| C109,209 | 1 uF 250V electr. | |
| C110,210 | 47 pF 250V | |
| C111,211 | 6800 pF 250V | |
| C112,212 | 2200 pF 250V | |
|
| D ------ | | SEMICONDUCTOR DIODES |
| D1-3 | 1N4007 | ECG/NTE 125 |
| D4-7 | 1N4002 or better | ECG/NTE 116 |
|
| F ------ | | FUSE |
| F 1 | 0.25A Slo-blo (MDL) fuse/ holder | Holder: Mode 55-800-0, etc. |
|
| J ------ | | JACKS AND CONNECTORS |
| J P1 | 2-wire AC plug and cord 5A | Mode 30-021-0 |
| J101-103 | RCA jack | Mode 24-181-0 |
| J201-203 | RCA jack | Mode 24-181-0 |
|
| PCB ---- | | PRINTED CIRCUITS |
| PCB 1 | Preamp PCB (optional) | (artwork available from website)
|
|
| R ----- | | RESISTORS |
| R1 | 470R 1/2W | 1/4 5% unless noted |
| R2, R3 | 3.3K | |
| R4, R5 | 1R 2W | |
| R101, 201 | 100K | |
| R102, 202 | 100K | |
| R103, 203 | 47K | |
| R104, 204 | 1.5K | |
| R105, 205 | 27K | |
| R106, 206 | 330K 1/2W | |
| R107, 207 | 180K 1/2W | |
| R108, 208 | 91K 1/2W | |
| R109 ,209 | 160K | |
| R110, 210 | 51K | |
| R111, 211 | 22K | |
| R112, 212 | 100K | |
| R113, 213 | 47K | |
| R114, 214 | 27K | |
| R115, 215 | 4.7K | |
| R116, 216 | 47K | |
| R117, 217 | 10K | |
| R118, 218 | 160K | |
| R119, 219 | 220K | |
| R120, 220 | 1K | |
| R121, 221 | 1.2K | |
| R122, 222 | 43K | |
|
| S ------ | | SWITCHES |
| S 1 | SPST 6A mini-toggle (power) | Mode 41-230A-0 |
| S 2 | DPDT 6A mini-toggle (power) | Mode 42-342A-0 |
|
| T ------ | | TRANSFORMERS |
| T 1 | Power Transformer, 12V .5A or better | Mode 60-912-0 |
| T 2 | Power Transformer, 12V .3A or better | Mode 60-912-0 |
|
|
| V ------ | | VACUUM TUBES (VALVES) |
| V1, 3 | 12AX7A | dual triode |
| V2 | 12AT7A | dual triode |
|
|
| VR ----- | | NEON REGULATORS
(Mode 55-120-0) |
| VR101-3 3x NE-2 | | matched with VR201-3 |
| VR201-3 3x NE-2 | | matched with VR101-3 |
|
|
|
| Chassis, as desired |
| Bottom plate for chassis, if needed |
| Hookup wire (600V) |
| Shielded cable, single and double conductor |
| Perf-board as required for power supply sections |
| Mounting hardware (bolts, nuts, washers, L brackets for mounting perfboard) |
| Strain relief for power cord |
| Terminal strips, phenolic solder type |
| Tube sockets (3 ea. 9-pin PCB- or chassis-mount) |
